The basis of production process of Dongguan clean cloth

     Dongguan is a new type of fiber product which has a soft, breathable and planar structure with a soft, breathable and planar structure, which is directly used for the forming process and the consolidation technology of the polymer. Dongguan dust cloth has an important quality parameters: hair dust means that the amount of dust through the amount of dust to evaluate the dust, dust, dust less, the more clean, clean. It has the characteristics of short process, high output, low cost, fast variety and wide variety of raw materials:
1, spunlace non-woven fabric is: will high pressure fine water spray to one or more layers of fiber network, the mutual entanglement of fibers together, so that the fiber web to be reinforced and have a certain strength.
2, heat sealing non-woven fabric: is defined in the fiber network with fibrous or powder hot melt bonding materials, fiber network again after heating and melting cooling reinforcement into cloth.
Dongguan clean cloth
3, pulp airlaid nonwoven: can be called dust-free paper, dry cloth. It is the use of air flow into the net technology will be wood pulp fiber board to open a single fiber state, and then use the air flow method to make the fiber agglutination in a net curtain, fiber network and then reinforced into cloth.
4, wet non-woven fabric: it will be placed in the water medium in the fiber raw materials to open a single fiber, at the same time to make different fiber raw materials mixed, made of fiber suspension, suspended slurry transport to a net mechanism, fiber in the wet state into the net and then reinforced into cloth.
5, spunbond nonwoven fabric is in the polymer has been squeezed out, stretching to form continuous filament, filament laying into the net, fiber network through self bonding, thermal bonding, chemical bonding or mechanical reinforcement method, the fiber network becomes a non-woven fabric.
6, melt blown non-woven fabric: the process of the process: the polymer feed --- melt extrusion --- fiber formation --- the fiber cooling --- into the net --- reinforcement into cloth.
7, needle punched non-woven fabric is dry non-woven a, needle punched non-woven fabric is the needle puncture, fluffy fiber web reinforcement into cloth.
8, stitch cloth: is a kind of dry non-woven, seam weave is the warp coil structure for reinforcing fiber, yarn layer, non textile materials (for example plastic sheet, plastics thin metal foil) or their combination, to produce non-woven fabric.